XS Power BIG3XS 1/0 AWG, 350A Big 3 Upgrade Kit

Description

What's in the box
One 6-foot XSFLEX 1/0-gauge power cable with ring terminals on both ends (blue)
Two 4-foot XSFLEX 1/0-gauge ground cables (pearl)
Two extra 1/0-gauge crimp-on ring terminals
2 Heat shrink terminal protection tubes
10 wire clamps
Ten 3" Zip-ties
Ten 1/2" Self-tapping screws
Instructions on the box
About this item
Written by Crutchfield's Jon Paul
The one-step "Big 3" upgrade kit If your aftermarket audio system is putting a strain on the rest of your car's electronics, you might want to upgrade your factory wiring. Rated to 350 amps, this "Big Three" grounding kit will boost your electrical system's performance. XS Power's Big3XS kit includes heavy-duty 1/0-gauge oxygen-free copper cables that replace (or augment) your vehicle's battery ground-to-chassis wire, the chassis-to-engine block wire, and the wire connecting thealternator's positive output to the battery's positive terminal. Another bonus is that the 8.5 mm ring terminals are already crimped to the wires, so you won't have to replace the stock grounds unless you want to improve them or double up. Extra ring connectors are included, so you'll be able to trim the wires to length and replace the terminals if needed. The Package The 350-amp Big3XS kit includes: 1 6-foot XPFLEX 1/0-gauge power cable 2 4-foot XPFLEX 1/0-gauge ground cables 8 XS Power heat shrink tubes 8 1/0-gauge crimp crimp terminals (already crimped on the wires) 10 wire clamps 10 zip ties 10 screws Warranty: 1 year